Filter
Top Products
19
Phone/Call settingsNetworkSound & AlertStatistics/InfoGPS facilitiesWAP Internet
}Make a new call
During a call you may call a new number. The
active call will be put on hold.
Enter the number via the keypad
Press
!
or:
Press
Options
Select New Call
Enter the number via the keypad
Press
!
Make a new call using the
phonebook
Press Options
Select Names
The phonebook is displayed
Scroll to the desired name
Press
!
}Swap between parties
When you are connected with two parties
you can switch between the active call and
the call on hold. Swapping to one party puts
the other one on hold.
To swap:
Press
Options
Select Swap
or
Press
/
}Transfer a call
If you have one single call on hold and a
second one active you can connect the two
parties and disconnect yourself:
Press
Options
Select Transfer Call
}Conference call
You can have up to 6 parties in a conference
call (including yourself). You may add parties
to a conference using the phonebook, the
list of dialled numbers or the keypad.
To add a party during a call:
Make a new call (see above)
Press
Options
Select Conference
You now can talk to all parties at
the same time
To add another party:
Make a new call and repeat these steps
Connect a private call
You can isolate a party from the conference
and talk exclusively with this ’private call’.
The other parties of the conference will be
put on hold and will not hear what you are
speaking with the ’private’ party:
Press
Options
Select Private
The list of active calls is displayed
Scroll to the party you want to make a
private call with
Press
Select
The conference is put on hold and
you can talk with the private party
Note:
You can only have up to two active calls at
one time. Therefore you can select Private
only if your second line is not busy with an-
other call.
}End one call
To remove one call from the conference:
Press
Options
Select Remove
A list of all parties is displayed
Scroll to the party to be disconnected
Press
Remove
}End all calls in one step
Ending all calls in one step terminates the
multiparty call. All parties will be disconnect-
ed from each other and they will hear the
tone for ’line busy’.
Press Options
Select End All Calls