Kyocera Q Phone Cell Phone User Manual


 
14
When the battery charge level becomes low, the low
battery sensor will alert you by displaying the
screen icon and sounding an audible tone. If the
battery level becomes too low, the phone will switch
off and any function in progress will not be saved.
Batteries may be charged using the standard
desktop charger, optional travel charger, or ciga-
rette lighter adaptor.
Using the Desktop Charger
Warning: Only use the desktop charger and AC adaptor
provided with the phone. Using the wrong adaptor may
cause damage.
1. Plug one end of the AC adaptor into the charger
holder and the other end into a wall outlet.
2. Insert the battery pack in the rear of the charger
or the phone with installed battery pack into the
front of the charger or both simultaneously. You
should then see a red light on the charger indi-
cating that the battery is being charged.
If completely discharged, the battery will charge in
approximately 1 to 2 hours. If you leave the phone
on while it is in the desktop charger, the battery
will take longer to charge.
You do not need to completely discharge the battery
before charging. Unlike other battery systems, there
is no memory effect which could degrade the
battery’s performance.