Filter
Top Products
58
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear
the notification.
3. Select one of the following:.
– TTY Off disables TTY.
– TTY On enables TTY devices.
– TTY On + Talk enables TTY devices and
voice carry over.
– TTY On + Hear enables TTY devices and
hearing carry over.
Note: You can also enter
##889 with your
keypad and select
TTY to enable TTY.
Connect to Hearing Aid Device
With a T-coil hearing aid device connected, you
can enable the hearing aid feature.
1. Connect the T-coil hearing aid device to
your phone.
2. From Hearing Aid, select OK > Enabled.
Network
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
From
Roam/Svc Alert, select one of the following:
• Disabled turns roaming service alert off.
• When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
• On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a
call when roaming.
From
Roam Option, select Automatic (to allow
roaming) or
No Roaming (to disallow roaming).