Filter
Top Products
Turning your phone on and off
Turning your phone ON
1. Install a battery to the handset and connect the phone to an external power
source such as the mains adapter, cigarette lighter adapter or hands-free
car kit. Or install a charged battery pack to the handset.
2. Press for a few seconds until the LCD screen is turned on.
3. Depending on the status of the PIN code request setting you may need to
enter your PIN code.
Turning your phone OFF
Press for a few seconds until the LCD screen is turned off.
Access codes
You can use the access codes described in this section to avoid unauthorised
use of your phone. The access codes (except PUK and PUK2 codes) can be
changed by using the Change codes feature [Menu-9-5-3]. See page 91.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card
against unauthorised use. The PIN code is usually supplied with the SIM card.
When the PIN code request is set to Enable, your phone will request the PIN
code every time the phone is switched on. When the PIN code request is set
to Disable, your phone connects to the network directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to access functions
such as Advice of Call Charge and Fixed dial number.
These functions are only available if supported by your SIM card. Check with
your network for further information.
F1200
User Guide
23
Getting started