Filter
Top Products
Getting Started
22
Getting Started
5. Close the plastic slot protection.
6. To remove the memory card, turn
the phone off, open the slot
protection and push the microSD to
unlock it. Carefully extract the
memory card.
Attention:
]
Avoid using the Flash Memory Card
when the battery is low.
]
When writing to the card, wait for the
operation to complete before removing
the card.
]
The card is designed to fit easily into
the system one way only.
]
Do not bend the card or force it into
the slot.
]
Do not insert any memory cards other
than those made by microSD.
]
If the microSD has been formatted using
FAT32, format the microSD using FAT16
again.
For more information on the microSD,
please refer to the memory card
instruction manual.
Memory card formatting
Before you start to use the memory
card you have to format it. After you
insert the memory card, select Menu >
Settings > Phone settings > Memory
manager > External memory, then
press the left soft key.
This operation should only be done
when you insert the memory card for
the first time. During formatting various
folders will be created for different data
types.
Turning the handset on/off
Turning your handset on
Ensure that your USIM card is in your
handset and the battery is charged.
Press and hold until the power
comes on. Enter the USIM PIN code
that was supplied with your USIM card
if the PIN code request is set to On.
(Note: Please refer to page 79)
After a few seconds you will be
registered on the network.