Filter
Top Products
Settings
82
Settings
6. Press the right soft key in the PIN
code entry window to return to the
previous step.
PIN2 code
PIN2 is the abbreviation for Personal
Identification Number 2, and is used to
restrict use by unauthorised users as
with the PIN. The PIN2 code change
procedure is the same as the one for
the PIN code. 3 incorrect PIN2 code
entries would invalidate the PIN2 code.
In this case, you have to enter the
PUK2 code in order to use the PIN2
code again. The maximum number of
times you may try to enter the PUK2
code is 10, like PUK1. 10 incorrect
PUK2 code entries would invalidate the
PIN2 code.
Security code
The security code is used to change the
mobile phone password. The maximum
number of attempts to enter the
security code is not limited as it is with
PIN and PIN2.
Power save (Menu #.2.6)
Decide whether to activate the power
save mode or not.
Memory manager (Menu #.2.7)
Common memory
This function shows the status of the
user memory of the mobile phone.
Since this function scans the overall file
system for statistics, a few seconds are
required.
Reserved memory
This function shows the status of the
User reserved memory. The usual
contents are Text msg, Contacts,
Calendar, Tasks, Memo, Alarms, Call
history, and Bookmarks. And it gives a
clear illustration of the actual amount
compared with the total amount for
each item.
Note
]
Three incorrect PIN code entries in the
PIN code entry window would invalidate
the PIN code. In this case, you have to
enter the PUK (PIN Unblock Key) code to
configure the PIN code again. The
maximum number of times you may enter
the PUK code is 10. (Note: If you enter
an incorrect PUK code10 times, the USIM
card will be blocked and must be
replaced.)