LG Electronics 245 Cell Phone User Manual


 
10
TECHNICAL DETAILS
TECHNICAL DETAILS
Technical Details
The LG245 is a trimode phone that operates on both
(Code Division Multiple Access CDMA) frequencies:
cellular services at 800 MHz and (Personal
Communication Services PCS) at 1.9 GHz. Also, the
LG245 works on Advanced Mobile Phone Service. We
call it a tri-mode phone. Since the phone operates on
Cellular, PCS and AMPS, the call fail rate is less than on
a conventional dual-mode or single-mode phone.
CDMA technology uses a feature called DSSS (Direct
Sequence Spread Spectrum) that enables the phone to
keep communication from being crossed and to use
one frequency channel by multiple users in the same
specific area. This results in a 10-fold capacity increase
when compared with analog mode. In addition, features
such as soft / softer handoff, hard handoff, and
dynamic RF power control technologies combine to
reduce call interruptions.
The Cellular and PCS CDMA networks consist of
MSO (Mobile Switching Office), BSC (Base Station
Controller), BTS (Base Station Transmission System),
and MS (Mobile Station).
* TSB-74: Protocol between an IS-95A system and
ANSI J-STD-008
1xRTT system receives twice as many subscribers in
the wireless section as IS-95. Its battery life is twice
as long as IS-95. High-speed data transmission is
also possible.
The following table lists some major CDMA
standards.
LG245B_Eng_new.qxd 2007.1.5 3:19 PM Page 10