Filter
Top Products
33
In-Call Menu
33
This feature, known as Call Waiting, is only available if
your network supports it. For details of how to
activate and deactivate it see Call Waiting (Menu
#.3.4)
If Call Waiting is on, you can place the first call on hold
and answer the second, by pressing .
Rejecting an Incoming Call
You can reject an incoming call without answering by
simply pressing the key.
During a call, you can reject an incoming call by
pressing the key.
Muting the Microphone
You can mute the microphone during a call by pressing
the [Options] key then selecting [Mute]. The handset
can be unmuted by pressing the [Unmute]. When the
handset is muted, the caller cannot hear you, but you
can still hear them.
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use the
phone with an automatic switchboard) press the key
[Options] followed by Send DTMF
_
DTMF on. Select
DTMF off to disable DTMF tones. DTMF tones are
normally on.
Conference Calls
The conference service provides you with the ability
to have a simultaneous conversation with more than
one caller, if your network service provider supports
this feature. A conference call can only be set up when
you have one active call and one call on hold, both
calls having been answered. Once a conference call is
set up, calls may be added, disconnected or separated
(that is, removed from the conference call but still
connected to you) by the person who set up the
conference call. These options are all available from
the In-Call menu. The maximum callers in a conference
call are five. Once started, you are in control of the
conference call, and only you can add calls to the
conference call.