Filter
Top Products
Change codes
(Menu #.4.6)
PIN is an abbreviation of Personal Identification
Number to prevent use by unauthorised person. You
can change the access codes: Security code, PIN
code, PIN2 code.
1. If you want to change the Security code/PIN1/
PIN2 code input your original code, and then press
[OK].
2. Input new Security code/PIN1/PIN2 code and
verify them.
Network
Menu #.5
You can select a network which will be registered
either automatically or manually. Usually, the network
selection is set to Automatic.
Network selection
(Menu #.5.1)
You can select a network type.
Automatic
If you select Automatic mode, the phone will
automatically search for and select a network for you.
Once you have selected “Automatic”, the phone will
be set to “Automatic” even though the power is off
and on.
Manual
The phone will find the list of available networks and
show you them. Then you can select the network
which you want to use if this network has a roaming
agreement with your home network operator. The
phone let you select another network if the phone fails
to access the selected network.
Preferred
You can set a list of preferred networks and the phone
attempts to register with first, before attempting to
register to any other networks. This list is set from the
phone’s predefined list of known networks.
Band selection
(Menu #.5.2)
EGSM/DCS
Depending on Network situation, you can select
EGSM/DCS.
PCS only
Depending on Network situation, you can select PCS
only.
Settings
Settings
92