Filter
Top Products
103
VX4600
102
VX4600
Alerts (Menu )
Allows you to set any of the four Alert options to
either
On
or
Off
.
1. Press Left Soft Key
Menu
.
2. Press
Settings
.
3. Press
Sounds
then press
Alerts
.
4. Select an alert option.
Service Change (Menu )
Alerts you when service changes. When you
enter a service area, the phone displays
Entering Service Area message. When you
leave a service area, the phone displays
Leaving Service Area message.
Minute Beep (Menu )
Alerts you 10 seconds before the end of
every minute during a call.
Call Connected (Menu )
Alerts you when the call is connected.
Back To Top (Menu )
Alerts you when you scroll through the end
of a menu list.
5. Select an option and press .
6. Set
Off / On
with then press .
Using Phone Menus
Using Phone Menus
Volume (Menu )
Allows you to set various volume settings.
1. Press Left Soft Key
Menu
.
2. Press
Settings
.
3. Press
Sounds
then press
Volume
.
4. Select
Ringer / Earpiece / Key Beep
.
5. Adjust the volume of the ringer with
then press to save the setting.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by
the simultaneous transmission of two tones, one
from a group of low frequencies and another
from a group of high frequencies. Each group of
frequencies consists of four frequencies. Setting
the Key Beep length to Long will extend the
DTMF tone.
VX4600-(E) 111.QXD 04/1/27 10:29 AM Page 102