Filter
Top Products
10
VX6100
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions: (1)
This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must accept
any interference received, including interference that causes
undesired operation.
Technical Details
The VX6100 is a tri-mode phone (1.9 Ghz CDMA, 800 Mhz
CDMA/AMPS) that operates on both Code Division Multiple
Access (CDMA) frequencies: cellular services at 800 Mhz and
Personal Communication Services (PCS) at 1.9 Ghz. Also, the
VX6100 works on Advanced Mobile Phone Service(AMPS).
CDMA technology uses a feature called DSSS (Direct Sequence
Spread Spectrum) that enables the phone to keep
communication from being crossed and to use one frequency
channel by multiple users in the same specific area. This results
in a 10-fold capacity increase when compared with analog
mode. In addition, features such as soft / softer handoff, hard
Handoff, and dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist of MSO (Mobile
Switching Office), BSC (Base Station Controller), BTS (Base
Station Transmission System), and MS (Mobile Station). The
following table lists some major CDMA standards.