Filter
Top Products
FieldPoint
TM
cFP-20
xx
Quick Start Guide
What You Need
to Get Set Up
• cFP-20
xx
LabVIEW RT controller
• Mounting hardware (DIN rail, panel-
mount, or rack-mount accessory)
• I/O module(s)
• Connectivity accessories: connector
blocks, cables
• 11–30 V power supply
• Accessories: Ethernet cable,
screwdriver
• PC running Windows
• FieldPoint software 3.0.2 or later
• LabVIEW RT
106 mm [4.18 in.]
Cabling
Clearance
Min. 182 mm [7.18 in.]
4 slots = 246 mm (9.68 in.)
8 slots = 441 mm (17.4 in.)
Cooling Outline
50.8 mm [2.00 in.]
Cooling Outline
50.8 mm [2.00 in.]
MMoouunntt tthhee CCoommppaacctt FFiieellddPPooiinntt BBaacckkppllaannee
You can mount the cFP-BP-
x
backplane on a 35 mm DIN rail, on a panel, or in a standard 19 in. rack.
Before using any of these mounting methods, record the serial number from the back of the backplane.
1
127 mm [5.00 in.]
Cabling
Clearance
Min. 165 mm [6.50 in.]
Cooling Outline
51–76 mm [2–3 in.]
All Around
4 slots = 246 mm (9.68 in.)
8 slots = 441 mm (17.4 in.)
CCAAUUTTIIOONN
Keep in mind these requirements for space and cabling clearance:
• Allow at least 51 mm (2 in.) all around the backplane for air circulation.
• Allow 38 mm (1.5 in.) below the controller for cabling clearance.
1
cFP-20xx Quick Start Guide
©
National Instruments Corporation