Filter
Top Products
Mounting the Backplane on a Panel
A. Fasten the panel-mount plates to the back of the
cFP-BP-
x
using a number 2 Phillips screwdriver and
the 8-32 × 5/16 in. countersink screws shipped with
the kit.
B. Bolt or screw the panel-mount
accessory to a panel.
C. Connect the PE ground terminal
on the cFP-BP-
x
to safety ground.
N
A
TIO
N
A
L
IN
S
TR
U
M
E
N
T
S
102 mm (4 in.)
260 mm (10.25 in.)
102 mm (4 in.)
457 mm (18 in.)
CCAAUUTTIIOONN
Do not use screws longer than
5/16 in. to fasten the panel-mount plates to
the backplane.
CCAAUUTTIIOONN
Disconnect
power before removing the
backplane from the panel.
3
cFP-20xx Quick Start Guide
©
National Instruments Corporation