Filter
Top Products
Messages (Menu 1)
24
Copyright
©
2004 Nokia. All rights reserved.
Call and set up your
voice mail
1. Once you have saved the voice
mailbox number, press and hold 1.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the service’s
automated instructions to set up
your voice mail.
Listen to your voice
messages
Once you have set up voice mail, you
can dial the number in one of four
ways:
• Dial the number using the keypad.
• Press and hold 1.
•Press Listen if there is a
notification message in the
display.
• At the standby screen, select
Menu > Messages > Voice
messages > Listen to voice
messages, and press Select.
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.
Automate voice mail
You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dial
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts
step-by-step. Keep in mind that
each voice mail service may vary.
However, it should look
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, and press *.
Be precise; you will need this
information in "Set up voice mail
with dialling codes" on page 25.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.