Filter
Top Products
Messages (Menu 1)
Copyright
©
2004 Nokia. All rights reserved.
25
The following dialling codes are
available:
Set up voice mail with
dialling codes
1. At the standby screen, press
Contacts > Speed dials > Select.
2. Scroll to an empty speed dialling
slot, and press Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you saved from
"Set up voice mail with dialling
codes" on page 25.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press OK.
6. Enter a name (such as voice mail),
and press OK.
To dial and listen to your voice mail,
just press and hold the assigned
speed dialling key at the standby
screen.
■ Picture messages
Picture messaging is a network
service. If your wireless service
provider supports this feature, your
phone comes with five preloaded
pictures. You can, however,
over-write any of the five pictures
that come with your phone. Pictures
can be attached to a message and
sent using text messaging to
compatible phones or PCs. Picture
messages behave the same as text
messages, but pictures take up more
space than text. Pictures are stored
in the Templates folder at Menu >
Messages >Text messages >
Templates.
Note: Picture message
function can be used only if it
is supported by your network
operator or service provider.
Only compatible devices that
offer picture message
features can receive and
display picture messages.
Dialling
code
Indicates...
*
Bypasses a set of
instructions.
+ International access.
p
Pauses for 2.5 seconds
before sending any
numbers that follow.
w
Waits for you to press
the Send key before
sending the numbers or
codes that follow.