Filter
Top Products
Messages
32
6. Enter your voice mailbox number, including the area code.
7. Enter any dialing codes as necessary using the information that you
wrote down.
If you pause for 5 seconds after connecting to voice mail, enter p twice after
the voice mailbox number; for example, 2145551212pp.
8. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
9. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, in the standby mode, press and hold the
assigned 1-touch dialing key.
Insert dialing codes
Press * repeatedly to cycle through the dialing codes. Once the desired code
appears in the display, pause briefly. The code is inserted into the dialing string.
The following dialing codes are available:
* —Bypasses a set of instructions
+—International prefix
p—Pauses for 2.5 seconds before sending the numbers that follow
w—Waits for you to press the call key before sending the numbers or codes
that follow
■ Minibrowser messages
To retrieve minibrowser messages, in the standby mode, select
Menu > Messages > Minibrowser messages > with Connect to launch the
minibrowser, or Back to escape and return to Messages.