Filter
Top Products
Settings
51
• A cable for connecting the TTY/TDD to your Nokia phone, usually supplied by
the manufacturer of the TTY/TDD device.
Set up the TTY/TDD profile
To connect your phone directly to the TTY/TDD device, set up the TTY/TDD profile.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the headset jack.
3. In the standby mode, select Menu > Settings > Enhancement settings >
TTY/TDD > Use TTY > Yes.
TTY/TDD calls
Important: Some manufacturers of TTY/TDD devices suggest that the
phone be at least 18 inches from the TTY/TDD device. When connecting
to any other device, read its user guide or contact its manufacturer for
detailed instructions and safety information.
• Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with the Nokia phone.
• TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
Make a call
1. In the standby mode, enter the number, and press the call key.
2. When the receiving party answers, begin typing your conversation on the
TTY/TDD.
3. Press the end key to end the call.
Receive a call
1. Make sure the TTY/TDD device is connected to your phone.
2. Press the call key to answer the call, and type your responses on the TTY/TDD.
3. Press the end key to end the call.
Charger
In the standby mode, select Menu > Settings > Enhancement settings > Charger
and one of the following options:
Default profile—Choose the profile you wish to be automatically activated when
your phone is connected to the charger.