Filter
Top Products
Settings
45
Automatic keyguard
To set the keypad of your phone to lock automatically after a preset time delay
(from 10 seconds to 60 minutes), do the following:
1. In the standby mode, select Menu > Settings > Phone settings > Automatic
keyguard > On or Off.
2. If you select On, Set delay: is displayed.
3. Enter the delay (in minutes and seconds), and select OK.
Important: When keyguard is on, calls may be possible to the emergency
number programed into your phone. Enter the emergency number, and
press the call key. The number is displayed only after you enter the
last digit.
Touch tones
Touch tones sound when you press the keys on your phone keypad. You can use
touch tones for many automated dial-up services such as banking and airlines, or
for entering your voice mailbox number and password.
Touch tones are sent during an active call and can be sent manually from your
phone keypad, or sent automatically by saving them in your phone.
Set type
1. In the standby mode, select Menu > Settings > Phone settings > Touch
tones > Manual touch tones; and select one of the following options:
• Continuous—Sets tone sounds for as long as you press and hold a key
• Fixed—Sends tones of the duration you specify in the Touch tone
length option
• Off—Turns off tones. No tones are sent when you press a key
Set length
To specify touch tone length when using the Fixed option, in the standby mode,
select Menu > Settings > Phone settings > Touch tones > Touch tone length >
Short (0.1 seconds) or Long (0.5 seconds).
Welcome note
You can write a welcome note that is briefly displayed whenever you switch your
phone on. Predictive text input is not available for entering welcome note text.