Filter
Top Products
48
To change your lock code
You can change your lock code with your phones menu.
Its recommended that you change your code immediately
because the default lock code (1234) appears in this own-
ers manual. In a lock code, only characters 0 to 9,
∗ and
# are accepted.
Changing the lock code is simple. Just use Menu 5 2 to do
this. Make sure to have your security code handy, youll
need it to change the lock code.
Note: Avoid entering access codes similar to emergency
numbers to prevent accidental emergency calls.
Menu 5 3, Restrict Calls
This feature allows you to restrict incoming and outgoing
calls to and from your phone. You can select the level of
restrictions through a series of menu choices.
Menu 5 3 1, Restrict outgoing calls
$OORZHG
means that all calls can be
made as usual.
%ORFNHG means that no calls can be
made.
/LPLWHG means that calls can be
made only to phone numbers stored in certain memory
locations.
When restricting outgoing calls by selecting
/LPLWHG, you
are prompted for an
$OORZ IURP ORFDWLRQ= and 7R
ORFDWLRQ=
value. For example, at $OORZ IURP ORFDWLRQ=
enter 1 and
7R ORFDWLRQ= enter 15, to allow only calls to
the numbers stored in locations 1-15.
When calls are restricted, calls may also be possible to the
emergency number programmed into your phone (e.g. 911
or other official emergency numbers). However, Emergency
Key 9 may not operate depending on the type of restriction
you choose.
The default setting for this feature is
$OORZHG.