Filter
Top Products
56
To store Touch Tone strings
with a phone number
1) Enter the phone number (e.g. your office voice mailbox)
2) Press
∗∗∗ (p) or ∗∗∗∗ (w)
3) Enter the Touch Tone string
(e.g. voice mailbox password)
4) Store the number as you normally would
When you dial this number, your phone first dials the
phone number, then waits (because of the w character)
for you to press
'70) (which will display as a soft key).
Your phone then sends your password.
If you include a p character instead of a w, your phone
pauses for 2.5 seconds, then automatically sends your
password as Touch Tones.
To link a stored phone number to Touch
Tone strings in another memory location
Use this if the phone number and DTMF digits do not fit in
one storage location. This feature links the phone number
to the memory location storing the DTMF string.
1) Enter the phone number
2) Press
∗∗ (+)
3) Enter memory location storing the DTMF string
4) Store the number as you normally would
When you recall this number sequence from memory and
press
í, your phone dials the phone number, displays
digits stored in the memory location after the +, then
sends them as Touch Tones when you press
'70).
Note: Your phone expects a memory location after the +
character. If one is not stored, you will need to enter a lo-
cation number at the prompt. Then press
2.
to send the
contents of that memory location as Touch Tones.