Filter
Top Products
Menu functions
34 Copyright © 2004 Nokia. All rights reserved.
• Data bearer. Select GPRS.
• Bearer settings, to edit the
following items:
• GPRS access point. Enter
the access point name to
establish a connection to a
GPRS network and press
OK. Contact your network
operator or service
provider for the access
point name.
• IP address. Enter the
address, press for a dot,
and press OK. You obtain
the IP address from your
network operator or
service provider.
• Authentication type.
Select Secure or Normal.
• User name. Enter the user
name and press OK.
• Password. Key in the
password and press OK.
• Allow adverts. You can allow or
reject advertisements. This
setting is not shown if the Allow
multimedia reception is set to
No.
To receive the multimedia
connection settings as a text
message
You may be able to receive the
service settings as a text message
from the network operator or service
provider that offers the WAP service
that you want to use. For more
information, contact your network
operator or service provider.
Font size setting
To select the font size for reading
and writing messages, press Menu,
and select Messages, Message
settings, Other settings and Font
size.
Service commands
Press Menu, and select Messages
and Service commands. Enter and
send service requests (also known as
USSD commands), such as activation
commands for network services, to
your service provider (network
service).
■ Call register
(Menu 2)
The phone registers the phone
numbers of missed, received and
dialled calls, and the approximate
length and cost of your calls.
The phone registers missed and
received calls only if the network
supports these functions, the phone
is switched on and within the
network’s service area.