Filter
Top Products
Menu functions
Copyright © 2004 Nokia. All rights reserved. 47
3. Open the image folder and scroll
to the desired image.
4. To set the image as wallpaper,
press Options and select Set as
wallpaper.
To activate or deactivate the
wallpaper
Press Menu, and select Settings,
Display settings and Wallpaper. To
activate/deactivate the wallpaper,
select On/Off, respectively.
Colour schemes
You can change the colour in some
display components, for example,
indicators and signal bars.
Press Menu, and select Settings,
Display settings and Colour
schemes. Select the desired colour
scheme.
Operator logo
To set your phone to display or hide
the operator logo, press Menu, and
select Settings, Display settings and
Operator logo. If you have not saved
any operator logo, this menu is
dimmed.
Note that the operator logo is not
displayed when the phone activates
the screen saver.
For more information on availability
of an operator logo via test
messages, MMS or WAP, contact
your network operator or service
provider. See also ”PC Suite” on page
69.
Display brightness
You can change the display
brightness level used on the phone
display.
Press Menu, and select Settings,
Display settings and Display
brightness. Scroll with and to
decrease and increase the brightness
level, and press OK to accept it.
Tone settings
Press Menu, and select Settings and
then Tone settings. You can find the
same settings in the Profiles menu,
see ”Profiles (Menu 4)” on page 41.
Note that the settings you make, will
change the settings in the active
profile.
Select Incoming call alert to choose
how the phone notifies you of an
incoming voice call. The options are
Ringing, Ascending, Ring once, Beep
once and Off.
Select Ringing tone for incoming
voice calls. To select ringing tones
that have been saved in the Gallery,
select Open gallery from the ringing
tone list.
Select Ringing volume and
Vibrating alert for incoming voice
calls and messages. The vibrating
alert does not work when the phone
is connected to a charger.