Filter
Top Products
Menu functions
Copyright © 2004 Nokia. All rights reserved. 61
4. Select Edit active service
settings.
Select each of the settings one by
one and key in all the required
settings according to the
information you have received
from your network operator or
service provider. Note that under
Data bearer menu you may
choose GSM data or GPRS as the
data bearer, and that all the
bearer-related settings are in the
Bearer settings menu.
For availability and subscription
to data services, contact your
network operator or service
provider.
GPRS Connection
You can set the phone to
automatically register to a GPRS
network when you switch the phone
on (network service). Press Menu,
and select Services, Settings,
Connection settings, Edit active
service settings, Bearer settings,
GPRS connection and Always
online. When you start an
application using GPRS, the
connection between your phone and
the network is established, and data
transfer is possible. When you end
the application, GPRS connection is
ended but the registration to the
GPRS network remains.
If you select When needed, the GPRS
registration and connection are
established when an application
using GPRS needs it and closed when
you end the application.
Making a connection to a
service
1. Firstly, make sure that the service
settings of the service you want
to use are activated. To activate
the settings:
•Press Menu, and select
Services, Settings and
Connection settings. Select
Active service settings and
scroll to the connection set
you want to activate and
press Activate.
2. Secondly, make a connection to
the service. There are three ways
to connect:
• Open the start page, for
example, the homepage of the
service provider:
Press Menu, and select
Services and Home, or in
standby mode press and hold
.
• Select a bookmark of the
service:
Press Menu, and select
Services, Bookmarks, and
select a bookmark. See
”Bookmarks” on page 64.