Filter
Top Products
Voice dialing
Make a phone call by saying the name that is saved in the
contact list of the phone.
As voice commands are language-dependent, you must
select Menu > Settings > Phone > Language
settings > Voice recognition language and your
language before using voice dialing.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection
key or the volume down key. A short tone sounds, and
Speak now is displayed.
2. Speak the name of the contact you want to dial. If the
voice recognition is successful, a list with matches is
shown. The phone plays the voice command of the first
match on the list. If it is not the correct command, scroll
to another entry.
Options during a call
Many of the options that you can use during a call are
network services. For availability, contact your service
provider.
During a call, select Options and from the following
options:
Call options are Mute or Unmute, Contacts, Menu, Lock
keypad, Record, Voice clarity, Loudspeaker or
Handset.
Network options are Answer or Reject, Hold or Unhold,
New call, Add to conference, End call, End all calls, and
the following:
● Send DTMF — to send tone strings
● Swap — to switch between the active call and the call
on hold
● Transfer — to connect a call on hold to an active call
and disconnect yourself
● Conference — to make a conference call
● Private call — to have a private discussion in a
conference call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume may
be extremely loud.
Write text
Text modes
To enter text (for example, when writing messages) you
can use traditional or predictive text input.
When you write text, press and hold Options to toggle
between traditional text input, indicated by
, and
predictive text input, indicated by
. Not all languages
are supported by predictive text input.
16