Settings
Nokia 6101 and Nokia 6102 User Guide 41 Copyright © 2005 Nokia
■ Phone
Select Menu > Settings > Phone and from the following options:
Phone language — to set the display and writing language
Memory status — to view the free memory and the used memory in Gallery,
Messages and Applications
Automatic keyguard — to set the keypad of your phone to lock automatically
after a preset time delay when the phone is in the standby mode and no function
of the phone has been used. Select On, and you can set the time from 5 seconds
to 60 minutes.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
Cell info display > On — to receive information from the network operator
depending on the network cell used (network service)
Welcome note — to enter a welcome note to be shown briefly when the phone is
switched on
Operator selection > Automatic — to set the phone automatically to select one of
the cellular networks available in your area. With Manual, you can select a network
that has a roaming agreement with your home network operator.
Confirm SIM service actions — see “SIM services,” p. 64.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a start-up tone when the
phone is switched on
■ Connectivity
You can connect your phone to compatible devices using an IR connection. You
can also define the settings for packet data dial-up connections.
Infrared
You can set up the phone to send and receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a connection
must be IrDA compliant. You can send or receive data to or from a compatible phone
or data device (for example, a computer) through the IR port of your phone.
Do not point the IR beam at anyone's eyes or allow it to interfere with other IR
devices. Infrared devices are Class 1 laser products.