Settings
Nokia 6101 and Nokia 6102 User Guide 44 Copyright © 2005 Nokia
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID (network service) > Yes, No, or Set by network
Line for outgoing calls (network service) — to select the phone line 1 or 2 to make
calls, if supported by your SIM card
■ Phone
Select Menu > Settings > Phone and from the following options:
Phone language — to set the display and writing language
Memory status — to view the free memory and the used memory in Gallery,
Messages, and Applications
Automatic keyguard — to set the keypad of your phone to lock automatically
after a preset time delay when the phone is in the standby mode and no function
of the phone has been used. Select On, and you can set the time from 5 seconds
to 60 minutes.
Security keyguard — to set the phone to ask for the security code when you
unlock the keyguard. Enter the security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
Cell info display > On — to receive information from the network operator
depending on the network cell used (network service)
Welcome note — to enter a welcome note to be shown briefly when the phone is
switched on
Operator selection > Automatic — to set the phone automatically to select one of
the cellular networks available in your area. With Manual, you can select a
network that has a roaming agreement with your home network operator.
Confirm SIM service actions — see “SIM services,” p. 69.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a start-up tone when the
phone is switched on
■ Connectivity
You can connect your phone to compatible devices using an IR connection. You
can also define the settings for packet data dial-up connections.
6101_Env1_9240568_KP.fm Page 44 Friday, May 6, 2005 10:24 AM
