Filter
Top Products
Settings
71
Copyright © 2007 Nokia. All rights reserved.
phone selects the language according to the information
on your SIM card. After you have changed the display text
language, the phone restarts.
Writing language—to change the writing language of
your phone. Changing the language affects the characters
and special characters available when writing text and the
predictive text dictionary used.
Predictive text—to set predictive text input On or Off for
all editors in the phone. Select a language for entering
predictive text from the list.
Themes
Apply themes. See “Themes,” p. 62.
Voice commands
Edit voice command and voice dialing settings. See “Voice
commands,” p. 78.
Date and time
Time and Date—to set the time and date
Time zone—to set the time zone of your location. If you set
Network operator time > Auto-update, the local time is
shown.
Date format—to select the format to display dates
Date separator—to select the date separator
Time format—to select between 24-hour and 12-hour
time format
Time separator—to select the time separator
Clock type—to select whether the analog or digital clock
is shown in the standby mode. See “Clock,” p. 64.
Clock alarm tone—to select the alarm clock tone
Workdays—to specify days for alarms repeated only on
workdays
Network operator time (network service) — to allow the
network to update time, date, and time zone information
to your phone. If you select Auto-update, all active
connections are disconnected. Check any alarms as these
may be affected.
Enhancement
To change settings of an enhancement, in the
Enhancement sett. view, scroll to an enhancement, such
as Headset, select Options > Open and from the
following options:
Default profile—to select the profile you want to activate
each time you connect the enhancement to your phone
Automatic answer—to set the phone to answer an
incoming call automatically after 5 seconds when this
enhancement is connected to your phone. If the Ringing
type is set to Beep once or Silent, automatic answer
cannot be used, and you must answer the phone manually.
Lights—To set the phone lights continuously on while
using the enhancement, select On.