Nokia 6120c Cell Phone User Manual


 
Connectivity
85
Copyright © 2007 Nokia. All rights reserved.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Dial Up Networking,
Serial Port, File Transfer, Object Push, Handsfree, Headset,
SIM Access, Generic Access, and Advanced Audio
Distribution. To ensure interoperability between other
devices supporting Bluetooth technology, use Nokia
approved enhancements for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Bluetooth connection settings
Select Menu > Settings > Connectivity > Bluetooth.
When you activate Bluetooth technology for the first time,
you are asked to give a name to your phone.
Bluetooth—to switch Bluetooth on or off.
My phone's visibility > Shown to all—to allow your phone
to be found by other Bluetooth devices at all times. To
allow your phone to be found for a defined time period,
select Define period. For security reasons it is advisable to
use the Hidden setting whenever possible.
My phone's name—to define a name for your phone.
Remote SIM mode > On—to enable the usage of the SIM
card of the phone by another device (for example, a car
kit) by Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
Send data
There can be only one active Bluetooth connection at a
time.
1 Open an application where the item you wish to send
is saved.
2 Scroll to the item you want to send, and select
Options > Send > Via Bluetooth.
3 The phone starts to search for devices within range.
Paired devices are shown with .
When searching for devices, some devices may show
only the unique device addresses. To find out the