Filter
Top Products
Set up your phone
Copyright © 2004 Nokia. All rights reserved. 19
Install the MMC card
Before installing the MMC card,
always make sure that the phone is
switched off and that you have
removed the cover and battery.
Open the MMC holder by lifting the
latch(1) and lifting the holder up (2).
Insert the MMC card into the holder
with the gold-coloured contacts
facing down, matching up with the
gold-coloured contacts on the
phone. The beveled corner of the
card fits into the beveled corner of
the slot.
Close the UIM/MMC holder and
replace the battery.
Replace the battery
1. Insert the battery, gold-coloured
contact end first, into the battery
slot.
2. Push down on the other end of
the battery to snap the battery
into place.
Replace the back cover
Set the back cover on the phone
with the cover tabs aligned with the
slots in the phone.
Slide the back cover toward the top
of the phone until the back cover is
securely in place.