Messages (Menu 1)
Copyright © 2005 Nokia. All rights reserved. 29
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 8585551212, pause
5 seconds, press 1, pause
2 seconds, press 1234, press
pound key.
Be precise; you will need this
information. See "Setup voice mail
with dialling codes", 29.
Insert dialling codes
Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
+—International dialling access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the Call
key before sending the numbers or
codes that follow.
Setup voice mail with dialling
codes
Note: If the Right selection
key on your phone has a
network operator menu,
select Menu > Contacts
instead of Names.
1. At the standby mode screen,
select Names > .
2. Scroll to an (empty) speed
dialling slot and press Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from Setup voice mail with
dialling codes, 30.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press OK.
6. Enter a name (such as Voice
Mail), and press OK.
