Filter
Top Products
Settings (Menu 7)
Copyright © 2004 Nokia. All rights reserved. 77
Automatic—The phone
automatically searches for
service in another digital
network. If one is not found, the
phone uses analog service. The
roaming rate applies when not in
the home service area.
3. Press OK, if necessary, to confirm
the activation.
Mode
You can choose whether your phone
uses digital or analog service.
1. At the standby mode screen,
select Menu > Settings >
Network > Mode.
2. Select one of the following
service options:
Digital preferred—The phone
works in digital mode, but will
also work in analog mode when
digital mode is unavailable.
Digital only—The phone only
works in digital mode.
■ Network services
The following features are network
services. See “Network Services” on
page 9 for more information.
Store a feature code
1. At the standby mode screen,
select Menu > Settings >
Network services > Network
feature setting.
2. Enter the feature code from your
service provider (for example,
*633Divert if busy), and press OK.
3. Select the type of diverting that
matches the feature code you
entered (for example, Call divert).
The activated feature code is now
stored in your phone, and you are
returned to the Feature code:
field. Continue entering other
feature codes (for example,
*633), or press the End key to
return to the standby mode
screen.
Note: Once you enter a
network feature code
successfully the feature
becomes visible in the
Network services menu.
Call diverting
Call diverting tells your network to
redirect incoming calls to another
number. Call diverting is a network
service and may not work the same
in all networks, so contact your
wireless provider for availability.