Filter
Top Products
Messages (Menu 1)
Copyright © 2004 Nokia. All rights reserved. 33
Listen to your voice
messages
Once you have setup voice mail, you
can dial the voice mailbox number in
one of five ways:
• Dial the number using the
keypad.
• Press and hold the 1 key.
• Press the 1 key and the Send key.
•Press Listen if there is a
notification message in the
display.
• At the standby mode screen,
select Menu > Messages > Voice
messages > Listen to voice
messages.
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.
Automate voice mail
You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dialling
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 8585551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, press pound
key.
Be precise; you will need this
information. See “Setup voice mail
with dialling codes” on page 34.
Insert dialling codes
Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.