Filter
Top Products
Settings (Menu 7)
Copyright © 2004 Nokia. All rights reserved. 73
Charger
Scroll to the option of your choice,
and press Select to enter the
submenu and modify its settings.
Default profile—Choose the profile
you wish to be automatically
activated when your phone is
connected to the charger.
Lights—Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
■ Security settings
If your wireless service provider
supports these features, you may be
able to change certain security
settings in your phone such as PIN
code request, Call restrictions,
Security level, Access codes, and
Voice privacy.
To answer a call with phone lock on,
press Answer or the Talk key.
PIN code
The PIN code protects the UIM card
from unauthorised access. The PIN
code must be 4 digits in length. After
three successive incorrect entries
the PIN code is blocked and you will
be asked to enter the personal
unblocking key (PUK) code. See
“Personal unblocking key (PUK)
code” on page 74 for more
information.
Note: The PIN code must be
obtained from your wireless
service provider. The PIN code
is typically provided with
your UIM card.
PIN code request
Enable your phone to request the
PIN code when powered on. This
provides extra security in case your
phone is lost or stolen.
1. At the standby mode screen,
select Menu > Settings >
Security settings > PIN code
request.
2. Enter the PIN code, and press OK.
3. Select On, and press OK.
Change PIN code
Before you can change your PIN
code, you will need to enable PIN
code request. See “PIN code request”
on page 73.
1. At the standby mode screen,
select Menu > Settings >
Security settings > Access codes
> Change PIN code.
2. Enter the current PIN code, and
press OK.