Filter
Top Products
Warning:
With the Flight profile you cannot make or
receive any calls, including emergency
calls, or use other features that require
network coverage. To make calls, you
must first activate the phone function by
changing profiles. If the device has been
locked, enter the lock code.
If you need to make an emergency call
while the device is locked and in the Flight
profile, you may be also able to enter an
official emergency number programmed
in your device in the lock code field and
select 'Call'. The device will confirm that
you are about to exit Flight profile to start
an emergency call.
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
If you have missed calls or received new
messages, you must view them before you
can see the clock.
Phone settings
Select Menu > Settings > Phone and
from the following:
Language settings — to set the display
language of your phone, select Phone
language. . To set a language for the
voice commands, select Recognition
lang..
Memory status — to check the memory
consumption
Automatic keyguard — to lock the
keypad automatically after a preset time
when the phone is in the standby mode
and no function has been used.
Security keyguard — to ask for the
security code when you unlock the
keyguard
Sensor settings — to activate and adjust
the tapping function
Voice recognition —
See "Voice
commands", p. 13.
Flight query — to be asked whether to
use the flight mode when you switch the
phone on. With the flight mode, all radio
connections are switched off.
Phone updates — to receive software
updates from your service provider
(network service). This option may not be
available, depending on your phone.
See
"Software updates over the air", p. 34.
Network mode — to use both the UMTS
and the GSM network. You cannot access
this option during an active call.
Operator selection — to set a cellular
network available in your area
Help text activation — to select whether
the phone shows help texts
Start-up tone — to play a tone when you
switch the phone on
Confirm SIM actions —
See "SIM
services", p. 16.
Make it your phone 11