Filter
Top Products
Pairing and authorising the connection
makes connecting quicker and easier, as
you do not have to accept the connection
between paired devices every time you
establish a connection.
The passcode for remote SIM access must
have 16 digits.
1 Select Options > New paired
device. The device starts to search for
Bluetooth devices within range. If you
have sent data using Bluetooth
connectivity before, a list of the
previous search results is displayed.
To search for more Bluetooth devices,
select More devices.
2 Select the device with which you want
to pair, and enter the passcode. The
same passcode must be entered to
the other device as well.
3 Select Yes to make the connection
between your device and the other
device automatic, or No to confirm
the connection manually every time a
connection attempt is made. After
pairing, the device is saved to the
paired devices page.
To give a nickname to the paired device,
select Options > Assign short name. The
nickname is only displayed in your device.
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all pairings,
select Options > Delete all. If you are
currently connected to a device and cancel
the pairing with that device, pairing is
removed immediately, and the
connection is ended.
To allow a paired device to connect
automatically to your device, select Set as
authorised. Connections between your
device and the other device can be made
without your knowledge. No separate
acceptance or authorisation is needed.
Use this status for your own devices, such
as your compatible headset or computer,
or devices that belong to someone you
trust. If you want to accept connection
requests from the other device separately
every time, select Set as unauthorised.
To use a Bluetooth audio accessory such
as a Bluetooth handsfree or headset, you
need to pair your device with the
accessory. For the passcode and further
instructions, see the accessory user guide.
To connect to the audio accessory, switch
on the accessory. Some audio accessories
connect automatically to your device.
Otherwise, open the paired devices tab,
select the accessory and Options >
Connect to audio device.
Block devices
Select
> Settings > Connectivity >
Bluetooth.
To block a device from establishing a
Bluetooth connection to your device, open
the paired devices tab.
Select a device you want to block and
Options > Block.
To unblock a device, open the blocked
devices tab, and select Options >
Delete.
To unblock all blocked devices, select
Options > Delete all.
If you reject a pairing request from
another device, you are asked if you want
to block all future connection requests
48 Connectivity
© 2009 Nokia. All rights reserved.48