Filter
Top Products
Get started
Insert SIM card and battery
1 To remove the back cover of the
device, open the micro USB connector
cover, press the release button, and
lift the back cover off.
2 Slide the SIM card holder back to
unlock it (1), lift the SIM card holder
(2), and slide the SIM card into the SIM
card holder (3).
Ensure that the contact area on the
card is facing down on the device, and
the bevelled corner is facing down in
the SIM card holder.
3 Lower the SIM card holder (4), and
slide it forward to lock it (5).
4 Insert the battery.
5 To replace the back cover, direct the
bottom locking catches toward their
slots (1), and press until the cover
locks into place (2).
Always switch the device off and
disconnect the charger before removing
the battery.
Insert a memory card
The memory card may be supplied with
the device, and may already be inserted.
1 Remove the back cover of the device.
2 Place the card in the slot with the
contact area facing down (1), and
8Get started
© 2009 Nokia. All rights reserved.8