Filter
Top Products
Quick guide
7
The PC Suite for Nokia 9110 Communicator works with Windows 95/98 and NT.
When connecting your communicator to a PC, you can also select whether to
use the infrared or the cable connection.
To use the PC Suite with an infrared connection
1 Make sure that the infrared port of the communicator faces the infrared
port of the PC.
2 Start the PC Suite software on the PC.
3 Start the Infrared activation application on your communicator and press
Activate. See ”System” on page 13 of this guide.
To use the PC Suite with a cable connection
1 Connect the 9-pin end of the RS-232 cable to the COM port of the PC, and
the other end to the connector at the bottom of the communicator.
2 Start the PC Suite software on the PC.
To use the Nokia Communicator Server
If you have Windows 3.11 or Apple Macintosh, use the Nokia Communicator
Server program for PC connectivity. The Windows version of the Nokia
Communicator Server is found on the diskette in the sales package, and the
Apple Macintosh version is on the CD-ROM.
With the Nokia Communicator Server you can use the communicator
applications that require PC connectivity. You need to connect your
communicator to a PC and start the necessary application on the
communicator.
Contacts
Contacts is used to manage contact information, such as phone numbers and
addresses. The entries in the Contacts directory are called contact cards. The
Contacts directory is used by all the communications applications: Telephone,
Fax, SMS and Mail.
To make a contact card
1 Press the Contacts application button on the communicator keyboard to
start the Contacts application.
2 Press New and write the necessary contact information in the empty
contact card.
Caution: Beware of viruses. Only
install on the communicator
software you have obtained from
sources that offer adequate
protection against viruses.