Filter
Top Products
Quick guide
3
4 When the SIM card is properly inserted into the SIM card slot, the bevelled
corner will remain visible. See figure 3.
5 When you are sure that the SIM card is correctly installed, replace the
battery. If there is little or no charge in the battery, it is recommended that
you connect the communicator to the charger and start charging the
battery before continuing with the start-up procedure. See below.
6 Open the cover of the communicator. You will see a welcome screen while
the communicator performs a self-test.
7 After the self-test is complete, you will see a list of countries on the
display, see figure 4. Scroll the dark grey selection frame using the arrow
keys on the keyboard over the name of your home country. Press the
button on the right side of the display next to the command OK. The
capital of your home country will be set as your home city.
8 Write the current date in the input field using the format dd.mm.yy, for
example 22.03.98, and press OK.
Figure 3
Figure 4
Note: The battery does not fit into place if the SIM
card is not correctly installed. Do not force the battery
into place! Check that you have inserted the SIM card
into the slot as described above. If the SIM card is
incorrectly installed, remove it by pulling it away from
the slot, and insert it again.