Filter
Top Products
Internet connections
23
Connection type:—Select the type of the network over
which you want to access the Internet.
To use a packet-switched data service in a cellular
network, such as GPRS (network service), select GPRS.
To use a circuit-switched data service in a cellular
network, such as HSCSD (high-speed circuit-switched
data; network service), select Data call.
Select Next to proceed.
2. Your device detects the cellular network type of your
phone automatically when you pair the phone with your
device. However, if you have not paired a mobile phone
with your device, in Select celular network type, select
the type of network over which the Internet connection
takes place, and select Next to proceed.
3. In the connection setup dialog, define the
following settings:
Access point name—Enter the name of the Internet
access point. Obtain the name from your Internet service
provider. This setting is only shown if you selected
packet-switched data connection (such as GPRS)
and your phone uses a GSM cellular network.
Dial-up number—Enter the modem telephone number
of the Internet access point.
User name—Enter a user name, if required. The user
name is usually provided by the Internet service provider.
Password—Enter a password, if required. The password
is usually provided by the Internet service provider.
Prompt password at every login—Select this option if
you want to enter your password every time you log on
to an Internet server, or if you do not want to save your
password in the device.
Tip: It is common in GPRS packet data networks
that the access point name is Internet or it is
left blank, the dial-up number is *99#, and the
user name and password may be left blank. For
CDMA packet data network settings, contact
your service provider.
4. In Connection setup: Complete, select Finish to save
the settings, or Advanced to define advanced settings.
For more information, see the device help.
Disable wireless connections
To disable WLAN and Bluetooth connections, briefly press
the power key, and select Offline mode > OK.
To enable connections, briefly press the power key, and
select Normal mode > OK.
Note: In the offline mode, you cannot use features
that require wireless network or Bluetooth
connection. To use the features, you must first set
the device back to normal mode. If the device has
been locked, enter the lock code.