Filter
Top Products
Settings
49
Call an allowed phone number
In the standby mode, enter an allowed number and press the send key.
Change lock code
The preset lock code is 1234 or the last four digits of your phone number.
If you enter the wrong lock code 5 times in succession, you will not be able to enter
a code for 5 minutes, even if you power off the device between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings >
Change lock code.
2. Enter the new lock code (must be 4 characters in length), reenter the new
lock code for verification, and select OK.
When you change your lock code, make sure you store it in a safe place, away
from your device. Avoid entering access codes similar to emergency numbers to
prevent accidental emergency calls.
Restrict calls
You can restrict the calls your phone can make and receive. When calls are
restricted, calls still may be possible to the official emergency number programed
into your phone. Contact your service provider for additional information.
1. In the standby mode, select Menu > Settings > Security settings >
Call restrictions.
2. Enter the security code, and select OK. See "Change lock code," p. 49.
3. Select the type of calls you wish to restrict:
Restrict outgoing calls > Blocked numbers or Allowed numbers > Select, Add
restriction, Edit, or Delete—Calls cannot be made.
Restrict incoming calls > Blocked numbers or Allowed numbers > Select, Add
restriction, Edit, or Delete—Calls cannot be received.
Voice privacy
Voice privacy is a network service. See "Network services," p. 6. If your wireless
service provider supports this feature, the voice privacy feature protects the
privacy of your current phone conversation from other callers placing phone calls
on your same network.
In the standby mode, select Menu > Settings > Security settings > Voice privacy >
On or Off.
2128i.ENv1a_BIL_9240270.fm Page 49 Wednesday, February 8, 2006 10:05 AM