![](http://pdfasset.owneriq.net/a/41/a41768c1-bfad-4596-9aad-613da03f9fad/a41768c1-bfad-4596-9aad-613da03f9fad-bg40.png)
[ 55 ]
Use advanced calling features
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1 When prompted for the calling card’s access number, enter the number
and press OK. This number is usually the 1-800 number that is listed on
the calling card.
2 When prompted to enter a calling card number and PIN number, enter
the number, and press OK. Press OK again when the Save changes?
message appears.
3 Use or to scroll to Card name, press Select, and enter the
card name using your phone’s keypad.
4 Press OK.
Choose a calling card to use
If you have more than one calling card, you’ll need to choose one before
making a call.
1 Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
2 Enter your security code and press OK.
3 Scroll to the desired card and press Options.
4 Scroll to Select and press OK.
Make a calling card call
1 Enter the phone number, including any prefix (such as 0 or 1) that
may be needed.
2 Press and hold until your phone displays the message Card call
and then Wait for tone, then press OK.
3 When you hear the tone from your calling card service, press OK.
4 After the tone, your phone displays the message Wait for tone, press
OK again. Press OK.
Note: This procedure might not apply to all the calling card
options that are programmed into your phone. Check your calling
card for more information, or contact your long distance company.