Filter
Top Products
Settings
60
Default profile—Choose the profile you wish to be automatically activated
when a loopset is connected.
Automatic answer—Calls are answered automatically after one ring when
a loopset is connected. Select On or Off.
TTY/TDD
Note: This feature is carrier dependent.
In addition to the Nokia phone, you will need the following for TTY/TDD
communication:
• A TTY/TDD device that is cellular ready or cellular compatible.
• A cable for connecting the TTY/TDD to your Nokia phone, usually
supplied by the manufacturer of the TTY/TDD device.
Set up the TTY/TDD profile
You can connect your phone directly to the TTY/TDD device. In order for your
phone to recognize the TTY/TDD, you will need to set up the TTY/TDD profile.
Important: Some manufacturers of TTY/TDD devices suggest that
the phone be at least 18 inches from the TTY/TDD device. When
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the 2.5-mm headset jack on the
side of your phone.
3. At the start screen, select Menu > Settings > Enhancement settings >
TTY/TDD > Use TTY > Yes.
TTY/TDD calls
• Check with the manufacturer of the TTY/TDD device for a connecting
cable that is compatible with the Nokia phone.
• TTY/TDD communications depend on network availability. Check
with your service provider for availability and description of services.
Make a call
1. At the start screen, enter the number, and press Call.
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 60 Tuesday, January 25, 2005 10:05 AM