Filter
Top Products
Settings
38 Copyright
©
2005 Nokia. All rights reserved.
■ Phone
Select Menu > Settings > Phone
settings and from the following
options:
Phone language — to set the display
language of your phone. If you select
Automatic the phone selects the
language according to the
information on the SIM card.
Memory status — to view the free
memory and the used memory in
Gallery and Messages
Automatic keyguard — to set the
keypad of your phone to lock
automatically after a preset time
delay when the phone is in the
standby mode and no function of the
phone has been used. Select On, and
you can set the time from 5 seconds
to 60 minutes.
When the keyguard is on, calls still
may be possible to the official
emergency number programmed
into your device.
Cell info display > On — to receive
information from the network
operator depending on the network
cell used (network service)
Welcome note — to enter a welcome
note to be shown briefly when the
phone is switched on
Operator selection > Automatic — to
set the phone automatically to
select one of the cellular networks
available in your area. With Manual,
you can select a network that has a
roaming agreement with your home
network operator.
Confirm SIM service actions — See
”SIM services” p. 70.
Help text activation — to select
whether the phone shows help texts
Start-up tone — to select whether
the phone plays a start-up tone
when the phone is switched on
■ Connectivity
You can connect your phone to
compatible devices using an infrared
connection. You can also define the
settings for packet data dial-up
connections.
Infrared
You can set up the phone to send
and receive data through its infrared
(IR) port. To use an IR connection,
the device with which you want to
establish a connection must be IrDA
compliant. You can send or receive
data to or from a compatible phone
or data device (for example, a
computer) through the IR port of
your phone.