Filter
Top Products
Push to talk
Copyright
©
2005 Nokia. All rights reserved. 53
■ PTT settings
There are two kinds of PTT settings:
settings for connecting to the
service and settings for use.
You may receive the settings for
connecting to the service from your
network operator or service provider.
See ”Configuration settings service”
p. xi. You can enter the settings
manually. See ”Configuration” p. 40.
To select the settings for connecting
to the service, select Menu > Push
to talk > Config. settings and from
the following options:
Configuration — to select a service
provider, Default, or Personal config.
for PTT service. Only the
configurations that support the PTT
service are shown.
Account — to select a PTT service
account contained in the active
configuration settings
PTT user name, Default nickname,
PTT password, Domain, and Server
address
To edit the PTT settings for use,
select Menu > Push to talk > PTT
settings.
To select the phone to allow the
reception of incoming one-to-one
calls, select 1 to 1 calls > On. To
make but not receive one-to-one
calls, select Off. The service provider
may offer some services that
override these settings. To set the
phone to first notify you of incoming
one-to-one calls with a ringing tone,
select Notify.
To activate the listened groups,
select Listened groups > On.
To set the phone to automatically
connect to the PTT service when you
switch the phone on, select PTT
status in startup > Yes.
To hide your PTT address from group
and one-to-one calls, select Send my
PTT address > No.