Filter
Top Products
41
Lock code
You’ll need the lock code to activate and deactivate
Phone Lock (see
page 50
), or to change your lock
code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row,
your
phone will
prompt you for the security code (see
page 59
).
Changing your lock code
In a lock code, only numeric characters are accepted.
1.
Enter
Menu
4 3 2 3 (
Settings
-
Security settings
-
Access codes
-
Change lock code
)
2.
Enter lock code at
Enter lock code:
and press
OK
3.
Enter new lock code, press
OK
4.
Verify new lock code, press
OK
Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad.
Note that touch tones are sometimes called DTMF
tones.
See “Touch tones” on page 65 for details.
Setting manual touch tones
Press
Menu
4 2 3 1 (
Settings
-
Phone settings
-
Touch
tones
-
Manual touch tones
) and highlight one of the
following options, then press
OK.
Continuous
means the tone sounds for as long as
you press and hold the key.
Fixed
sets the tone length to .1 second, regardless
of how long you press the key.
Off
turns the tones off, and no tones will be sent
when you press the keys.