77
6. Data and Fax Calls
Your phone can function as a fax/modem when
connected to your PC or laptop computer via the optional
DLR-3 Data Cable (available through your local Nokia
dealer). You must also have the appropriate fax or data
software installed and configured to send and receive
data or faxes through your phone.
Can I receive a data or fax call while a voice call
is in progress?
Yes. Your phone will display either
Data call
or
Fax call
,
depending on the type of incoming call. If no cable is
connected, the phone will display
Fax call, connect data
cable
or
Data call, connect data cable
. If you have Caller
ID, the caller’s name or number will also be displayed.
You must first terminate the voice call, then launch the
appropriate data or fax software and allow the software
to accept the incoming call.
Can I receive other calls while a data or fax call
is in progress?
No. The caller will receive a busy signal.
Can I place a voice call while a data or fax call is
in progress?
No. If a voice call is attempted while a data or fax call is
in progress, the phone will display
End data call?
End the
data or fax call from your computer’s software, or press
Back
to return to the data or fax call in progress.
Getting started
Make sure your phone is connected to your computer via
the optional DLR-3 Data Cable and your computer
recognizes the new hardware.
See the installation and configuration instructions supplied with
the DLR-3 cable for more information.