Filter
Top Products
36 Copyright © 2005 Nokia
Note: Voice mail services vary by service provider. The following
instructions are examples of common operations. Please check with your
service provider for specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press pound key.
Be precise; you will need this information in "Setup voice mail with 1-touch
dialing codes," p. 36.
Insert dialing codes
Press the * key repeatedly to cycle through dialing codes. Once the desired
code appears in the display, pause briefly and the code is inserted into the
dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Send key before sending the numbers or codes
that follow.
Setup voice mail with 1-touch dialing codes
1. In the standby mode, select Names > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot (2-9) and press Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from, "Call and setup your voice mail," p. 35.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6. Enter a name (such as Voice Mail), and press OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.