Filter
Top Products
70 Copyright © 2005 Nokia
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Settings > Voice commands.
2. Select the phone function you wish to tag (Profiles, Voice mailbox, Radio,
Infrared, Voice recorder or Call log).
3. If necessary, scroll to an option associated with that function, and press Select.
4. Select Options > Add.
5. Press Start, and speak the voice tag clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The icon appears next to
commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Press and hold the Right soft key.
2. When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the voice tag, Found: appears, and the phone plays the
recognized voice tag through the earpiece. The function you requested is
activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
•Select Playback to listen to the voice command tag.
•Select Change to change the voice command.
•Select Delete to erase the voice command tag.
Voice recorder
This feature allows you to record pieces of speech or sound with your phone and
listen to them later. The total available time is 30 seconds if no memos have been
stored. The maximum length of a recording depends on how much memory
remains available.