171Copyright © 2004 Nokia. All rights
1. Open an application where the item you wish to send is stored. For example, to
send a photo to another device, open the Gallery application.
2. Scroll to the item you want to send and select Options→Send→Via Bluetooth.
3. The phone starts to search for devices within range. Devices using Bluetooth
technology that are within range start to appear on the display one by one. You
can see a device icon, the device’s name, the device type, or a short name.
Paired devices are shown with . A paired device is one where a Bluetooth
connection already exists between your phone and the other device.
• To interrupt the search, press Stop. The device list freezes and you can start
to form a connection to one of the devices already found.
4. When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in standby mode when the Bluetooth connection is active.
If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices. If you
switch off the phone, the list of devices is cleared and the device search needs
to be started again before sending data.
5. Scroll to the device you want to connect with and press Select. The item you
are sending is copied to Outbox and the note Connecting is shown.
6. Pairing (if not required by the other device, go to step 7.)
• If the other device requires pairing before data can be transmitted, a tone
sounds and you are asked to enter a passcode.