Filter
Top Products
Camera
28
when the timer is running. The camera takes the picture
after the selected delay elapses.
You can also use the self-timer in the sequence mode.
Tip! Select Options > Self timer > 2 seconds to keep
your hand steady when taking a picture.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (), On
(), and Off ().
To switch between the flash modes, press the flash key.
Setup settings—adjust color and
lighting
To enable the camera to reproduce colors and lighting
more accurately or to add effects to your pictures or
videos, scroll through the toolbar, and select from the
following options:
Shooting mode—Select a proper shooting mode for the
environment in which you take pictures. Every shooting
mode uses its own lighting settings that have been
adjusted according to a certain kind of environment.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Exposure value (images only)—Adjust the exposure time of
the camera.
Colour tone—Select a color effect from the list.
The screen display changes to match any settings you
make so you see how the change affects the pictures or
videos.
The available settings vary depending on the selected
camera.
The setup settings apply only to the main camera.
Independent settings are available for image and video
modes, and are retained when switching between the two
modes.
Shooting modes
A shooting mode helps you to find the right color and
lighting settings for the current environment. Select a
proper shooting mode for taking pictures or recording
video clips from the shooting mode list. The settings of
each shooting mode have been set according to a certain
style or environment.